Official blog of www.NeedlePaint.com
where you can design your own Needlepoint!

NeedlePoint Kits and Canvas Designs | Design your own Needlepoint Kit!

We’ve really had a great time designing needlepoint belts this year.  One request we keep sending out is to show people how to measure a needlepoint belt.

I figured that we may as well write a blog post about this, so more people who are searching can learn how to measure a belt.

Actually, this was a mystery for me for a long time, as some companies belt sizes seem to vary from others, and I never understood why.

Basically, the key to figuring out a belt size, is to measure from the end of the belt (not the belt buckle – see left side marked A) to the center hole (see  right side marked B).  Click on the image below to see it more clearly.

How to measure a Needlepoint Belt

How to measure a Needlepoint Belt

This explains why some companies with longer metal buckles would have differences from belt size to belt size.

If you are stitching a custom needlepoint belt canvas and having it finished with leather belt ends, you’ll also want to know how much to stitch.

With our leather belt ends, you can calculate this by subtracting 8 inches from the belt size.  This is what we refer to as the visible area.  Then from here, we add two extra inches of background color to each side (the belt buckle will cover up this area).

Also, I’ve been going back and forth with finishers on a rolled edge vs using a binding stitch.  We have found a finisher who does not charge extra for doing a rolled edge, so it is a matter of preference.

Needlepoint Belt Binding Stitch

Needlepoint Belt Binding Stitch

Needlepoint Belt Rolled Edge

Needlepoint Belt Rolled Edge

If you prefer the rolled edge, then you will need to stitch two extra rows above and below the design, so the finisher can wrap the canvas under.

If you are looking for needlepoint belt ideas, check out our needlepoint belt canvas section, or have a look through our needlepoint belt blog posts.  If you have something else in mind, we’d be happy to design a custom belt canvas for you!

Comments on: "How to Measure a Needlepoint Belt" (2)

  1. Sallie Luedtke said:

    I need to make a 38 inch belt…how long should the needlepoint be?

    • Sorry for the delay! Our lead designer is out on maternity leave and I have not been on our blog in over a month! For a size 38 belt, the “visible” design-between the leather ends is 30 inches. You will want to stitch 2 extra inches of background on each side for a total of 34 inches. If you are having us do the finishing, you can just stitch 1 extra inch on each end. Please email info@needlepaint.com with any other questions. Thanks, Seth

Leave a Reply

Your email address will not be published. Required fields are marked *